How to Maintenance Automatic Wet Wipes Machine?
Time: 2021-05-08 11:51
WET WIPES MACHINE
The automatic wet wipes machine automatically feeds products through folding, humidification, cutting, counting accumulation, automatic packaging machine and other products, and is used for coding, opening, labeling, and the insertion angle of the packaging bag. The whole process does not require manual labor, and the fully automatic wet wipe machine has an automatic, fast and safe production process. However, each type of machinery needs to be maintained and maintained to prevent and avoid failures in the next work and affect the work progress.
Following is the Maintenance Steps of Automatic Wet Wipes Machine?
AUTOMATIC WET WIPES MACHINE
1. Before cleaning the automatic wet wipes machine, we need to turn off the power. Wipe the machine table and outer surface with a clean, damp cloth. The packaging machine will not be scratched. This kind of cleaning and maintenance work should be carried out regularly.
2. Use compressed air to remove product fragments from the feeding mechanism and the mid-end seal.
3. Use the oil on the wire brush to remove the adhesion of the knife tail to the film. If the packaging material is left on the knife, this will affect the next round of product packaging and cause packaging damage.
4. The solid-state relay is burned out, the thermostat is damaged, and the thermometer cannot control the temperature of the thermocouple. The repair method is to replace it with electricity, the temperature control meter, and the heating body.
5. There will be residual product fragments at the inlet and outlet of the packaging machine. The wet tissue machine must be cleaned in wholesale. It can be cleaned with an air compressor, and the effect is also very good.